7.5m Ultra Long Range Vessel

ID: 4571

BtB Marine’s 7.5m Ultra Long Range vessel “INDIGO” powered by COX Diesel outboard. Type of vessel: multi-purpose workboat. Classification: AMSA 2C. Port of registry: Hervey Bay, Australia. Flag: Australia. Designer: DMS Transport Solutions. Builder: BtB Marine, Australia. Harbour Patrol & Security. Crew Transfer. Ship Supplies, Inspections & Repairs. Dive Support. Marine Research. Hydrographic. ROV Support. SAR

19m Workboat

ID: 4993

Hull material: Steel. Flag: St Kitts & Nevis. Class Society and Notation: Indian Register of Shipping. Total Power Output: 949 bhp. Main Engine: 2x Weichan WP13C 482-1. Speed Cruising: 8 knots. Deck Load: 5 X 20 Ft Container. Cabin For Crew 2 Persons Plus Master on Bridge.

8.2m Multipurpose Boat For Sale - 3 units available

ID: 4720

Capacity: 10 passenger + 2 crew Power: 2 x Suzuki 200hp OBM Engine. Speed: 33 knots (+10% @ Lightship), 34-36 knots. Material: Hull - Aluminum 5083 H111. Loading Capacity: 1.2T. Material Thickness: Hull Bottom: 6mm / Side Plate: 5mm. 1 Month Delivery after signing of contracts.

NEW BUILD - 10m Aluminium Catamaran Work Boat - Kitset

ID: 1854

This is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder. Versatile Aluminium Catamaran Workboat. Passengers: 12. Crew: 1-2. Power Range: 2x 450 – 2x 550 hp. Survey: NSCV 2C. Can easily be modified to suit a wide range of uses.

NEW BUILD - Ribcraft 12.5 Pro

ID: 4505

The Flagship of the Ribcraft range, the 12.5 delivers the ultimate offshore response. By combining Ribcraft’s signature deep V hull and bow sheer with an extended waterline and generous beam, the 12.5m RIB makes easy work of virtually any sea condition. Designed for extended passages and operations requiring large payload capacities, the 12.5 offers incredible design flexibility. From a simple center console for optimal work space to multiple seating arrangements for crew and passenger transport to cabin arrangements for all weather protection or overnight accommodations, this flagship model answers the need for virtually any application.

NEW BUILD - 16.45m Workboat

ID: 424059

Survey: 2C / 2D. Main Engine: 2 x Volvo TAMD122A 400BHP @ 1900 RPM. Gearboxes: 2 x Twin Disc MG514 / std ratios of 5.16:1 Fuel: 2 x 7250 litres. Propellers: 2 x 5BL Kaplan type approx 1100mm Ø. Generator: 1 x 100kVa genset. Deck Winch: 30 Tonne central deck winch. Deck Cranes: 4.6 Tonne Palfinger.

NEW BUILD - 10m Landing Craft with Enclosed Wheelhouse

ID: 3087

This Landing Craft has been designed for serious work in demanding conditions. Class / Survey: RINA / BV. CE Category: B / C. Passengers: 10. Crew: 2. Deadweight: 2900 Kg. Service speed @ standard power: 18 knots. Max speed @ standard power: 22 knots. Main Engines: single 250hp diesel or twin 140 hp diesels. The structure is of marine grade aluminium All materials have RINa / DNV certification. While the hull’s dimensions and structure are standard, many other features of the boat can be configured as per owner’s requirements. This includes deck layout, wheelhouse dimensions, engine type and power, tankage and deck equipment. The standard layout includes several high capacity storage options : 2 forward seat lockers with waterproof lids, 1 cabin seat locker and 2 dive bottles lockers (with a capacity of 6 50 lt. Bottles). 2 side doors (700 mm. wide) are located aft of the forward seats. They can be of the “flip down” or “lift out” type or hinged. The boat can be equipped with a small crane installed on a reinforced base. Push-knees (optional) are designed and built as per owner requirements to address specific work conditions. The standard walkaround wheelhouse is large and comfortable. It is designed to offer good protection to two or three crew members even in bad weather conditions for long work periods.

NEW BUILD - 5.8m Tourist Boat - Kitset

ID: 4065

This is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder. Small Tourist Boat with glass bottom for viewing. Power Required: 1x 25 HP. Passengers: 12, Crew: 1. Survey: NSCV 2E.

NEW BUILD - 14m Multi-purpose Launch

ID: 1488

NEW BUILD 14m Multi-Purpose Launch built to BV Class available with short lead time ex yard Hong Kong.  Powered by twin Caterpillar C9.3 Marine diesel engines developing 416 BHP @ 2100 RPM, driving ZF W325 gearboxes with 4.409;1 reduction to two FFP in Korts nozzles and producing 10 TBP. Caterpillar C1.5 generator producing 11ekW 220V,single phase, 50Hz. Fuel capacity 5.1m3, Water 0.5m3.

Transportable Mini-tug / MP Workboat

ID: 3909

Based on a slightly smaller model we used to offer out of our Ukrainian shipyard, the MT650 is a new design that we now produce in Europe. It is a strong tug and push boat specifically designed for easy transportation : the operator can use her power, deck space and flexibility on any job around the world, and simply pack her on a truck or ship when the job is done. The strong hull, large fendering and good bollard pull make this tug suitable even for demanding applications. Hull shape, hydraulic steering and large rudder area give a comfortable ride and excellent manoeuvrability. Her size and open layout make for easy access to the water or to other craft for towing or pushing. The half open wheelhouse gives good weather protection and excellent vision from pilot’s position. Easy to operate, good sailing behavior and a good bollard pull , all in a small tug. This boat can be deployed just about anywhere around the world. The compact size and shallow draft make this vessel easily hoistable and transportable on a truck, which means fast deployment even at the remotest of locations. She also fits a standard 40’ High Cube container for overseas transportation. On the same design we can also produce 6.9mt and 7.9mt models (fully transportable).

7m Pollution Control Vessel For Sale

ID: 3864

Total power output: 200 bhp. Speed cruising: 15 knots. CE Certificate issued by the Builders. It could be delivered with Spanish trading certificates as Workboat for Harbour duties. Reported to be in full operational condition and with only 10 hours of use (sea trials). Fuel LPG / Gasoline. Capacity of the Tank Waste 0.5- 2.5 m3. Cleaning boat specially designed for water slides in marinas or docks. Collection of waste from the bow with baskets. 4 meter sweep width. 800 kg load capacity. 2 Bow locker. 2 solar panels.

NEW BUILD - 40m Utility Vessel

ID: 3694

Main Engine: 2 x 1030HP/ 759kW 1406 RPM - Mitsubishi S6R2-T2MTK3L. Free Deck Space: 221 (22.20m x 9.97m). Bow Thruster: 170 kW Marelli Motori/ Italy. Speed: 13 Knots (est.). Accommodation: 40 persons

NEW BUILD - Multipurpose Workboats

ID: 1360

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. Common features include deep V hull shape for maximum stability, non-slip deck, double bottom hull and 5 watertight sections of tubes filled with polystyrene foam for safety. They offer huge deck area, a lot of space and storage, elevated foredeck and push-up bow for functionality. Construction is UV resistant HDPE 100 sheets from Röchling®, state of art hand welding and structurally integrated all-around fenders for durability. They are available in 3 sizes: SEA VIZION R685 - Length Overall 6.85 m; SEA VIZION R585 - Length Overall 5.85 m; SEA VIZION R485 - Length Overall 4.85 m.

NEW BUILD - Sea Vizion W Series

ID: 1378

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. The Sea Vizion W Series is characterized by the rectangular hull shape. This provides maximum lift force and decreases the draft of the boat, makeing these boats ideal for shallow waters while also ensuring great stability and maximum storage area. The edges of the hull has been made by bending technique which provides fuel efficiency and structural integrity. They are available in 3 sizes: SEA VIZION W600, Length Overall 6.00 m. SEA VIZION W500, Length Overall 5.00 m. SEA VIZION W400, Length Overall 4.00 m. Sea VIZion boats are built to work in the most extreme weather and temperature conditions. The whole family is literally unsinkable, with collar tubes that thanks to HDPE construction will last forever. These boats will accompany you in your most difficult tasks on the seas around the globe.

NEW BUILD - 15.5m Catamaran Workboat

ID: 3621

IZ 1550 Fish Farm Steel Boat provides excellent maneuverability and high performance even in rough sea conditions due to its catamaran hull structure and its highly sophisticated balance distribution. IZ 1550 Fish Farm Steel Boat has proved to be very durable, safe and useful for fish farm support activities. IZ 1550 is a multifunctional boat for fish farms, offshore activities, commercial diving and thanks to its large deck working area it can also be customized to owners's requirements such as ocean cleaning, fire fighting, deck crane operations and marine constructions.

NEW BUILD - 10 Multipurpose Power Cat

ID: 3423

The SEABUS are multi-role high-performance catamarans designed for a wide range of marine activities including day charter, harbour operations, freight transport, oceanographic researches, water sampling campaigns, environmental/disasters protection, fishing activities etc. These vessels are built in Italy by SMC ITALIA, a company with a long history in the production of composite materials for the automotive, aerospace and marine industries. Their production includes several different models up to 20mt length, that SeaBoats can now offer to their international clients. The smallest of the series is SEABUS SB-330 is a multi-purpose catamaran for coastal navigation. It is specially designed for passengers but can also carry cargo or be equipped with crane, hoists, firefighting systems in order to support harbour activities.

NEW BUILD - 5m Alloy Tube Workboat.

ID: 1438

Looking for a sturdy platform to do a bit of diving from? Available now is a new build out of Bali that is a 5.25m aluminium pontoon dingy that can carry 6 persons with dive gear. Recommended power a single OBM 40 – 80 HP max. Build time 45 days.

NEW BUILD - 10.3m Multi-Purpose Cat Landing Craft

ID: 3385

Designed by the renowned designer Rick Welin (Canada) this very versatile workboat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do Anything" coastal worker, and she's trailerable. Designed to Lloyd's Registry Small Craft Scantlings rules for workboats she'll pass muster in any workboat category. The through-deck Moon-Pool allows her to hover above underwater loads for lifting at her center of flotation which allows a lifting capacity beyond that of any deck-mounted Hiab type of configuration. (NOTE: She can be built without the moon-pool as well). Other cabin sizes and configurations can be created as modifications to suit the owner needs. You may need an open deck with center console, or a small hardtop for instance. Or a larger cabin for crew-boat or water-taxi type of operations. 6mm bottom plating with beaching plates means never having to worry about landing on gravel shorelines, and her twin hulls mean you can ground her on any tidal flat and she'll sit level to provide versatility. Catamaran hulls lend themselves to beached stability beyond any mono-hull Landing Craft. Outboard power allows for a range of powering options depending on budget or speed requirements and affords the busy commercial operator the ability to upgrade or re-power at any time without significant downtime.

NEW BUILD - 11m Foil Assisted Power Cat

ID: 1404

This is a semi-asymmetrical, foil assisted catamaran  designed to offer economical cruising speeds of 24 -26 knots with twin 300hp outboards with up to 24 passengers on board. Designed by Noah Thompson (NZ), the boat is available in a variety of layouts to better address the needs of dive and tour operators. Foil-assistance permits a higher level of comfort and lower fuel consumption.   The NXT 35 SP is slightly bigger than the 35 DC but has similar characteristics : seaworthy hull, huge cockpit area, economy of operation and maintenance free construction. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 SP is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with open or enclosed sides, drop down clear screens and a layout fully customizable. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

NEW BUILD - Cutter Suction Dredger KET-500

ID: 3148

Hulls are built in disassembled sections for easy road transportation. Smart dredger design allows for easy handling, limited operating cost plus a wide range of applications. Built in steel to Bureau Veritas, Turkish Lloyd  or any other class society certification. Dredging depth 15 mt.

NEW BUILD - 9mDiving/ Fast Transfer / Power Cat

ID: 3110

Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of commercial operators or pleasure boaters who want a fast and very tough small catamaran, suitable for serious work even in difficult conditions. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters, the NXT 29 CC is characterized by excellent performance and good load carrying capacity. She is ideally suited for the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation.

NEW BUILD - All Purpose 8m Work Boat

ID: 1364

LAVAMPOSTO 800 is a tough, aluminum boat suitable for a variety of demanding applications. With a deep dead rise and reverse chine, this 8 Mt handles chop exceptionally well and can be configured in a variety of layouts to suit different uses : fishing/expedition boat, charter boat, research vessel, dive boat, rescue vessel or patrol boat. Every LAVAMPOSTO 800 is custom built and fully outfitted with all the necessary features and specifications that are exactly right for the duties it will be expected to perform.

NEW BUILD - Super Durable High Density Polyethylene Versatile Dive Boat

ID: 1592

HIGH BUOYANCY, SUPERIOR TENSILE STRENGTH, SHOCK ABSORBANT, HIGH GRADE HDPE, HIGH FREEBOARD AND NUMEROUS HANDHOLDS, LIGHT WEIGHT, SPECIFICALLY DESIGNED FOR DIVE PURPOSES.

NEW BUILD - 9m LCT (one new hull available)

ID: 1490

We offer this 9m aluminium landing craft for those who want simple and cost effective transport opportunities to carry passengers or cargo to secluded locations and beaches.

NEW BUILD - Centurion 26 Fast Dive Support Boat

ID: 1414

The new Centurion 26 Fast Diving Support boat is our latest high speed boat that is capable of a top speed of 23 knots! The latest design features an outstanding cockpit space to carry all the diving support equipment, compressors and 6 divers. Diving doors are provided at the aft and starboard side together with a diving ladder. The boat is extremely stable at rest with our innovative “Gull- Wing” side floatation sponson. The flat deck with large scuppers ensures that the deck is completely sealed and self-bailing in rough weather conditions.

NEW BUILD - Centurion 24 General Purpose Workboat

ID: 1413

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

NEW BUILD - Centurion 24 Aluminium Workboat

ID: 1412

The Centurion 24 Workboat is a wide body workboat to provide generous working space in a small workboat. The hull is designed for stability for crew during working. This hull is constructed with multiple chambers underneath and foam filled. This boat is capable for carrying 10 crews. It can be powered by single or twin petrol or diesel outboard motors.

NEW BUILD - Centurion 24 General Purpose Workboat - Ready for Delivery Now.

ID: 1999

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

NEW BUILD - Centurion 24 Aluminium Workboat - In Stock, available now.

ID: 1309

The Centurion 24 Workboat is a wide body workboat to provide generous working space in a small workboat. The hull is designed for stability for crew during working. This hull is constructed with multiple chambers underneath and foam filled. This boat is capable for carrying 10 crews. It can be powered by single or twin petrol or diesel outboard motors.

Centurion 26 Fast Dive Support Boat - Stock Boat

ID: 1996

The near new Centurion 26 Fast Diving Support boat is our latest high speed boat that is capable of a top speed of 23 knots! The latest design features an outstanding cockpit space to carry all the diving support equipment, compressors and 6 divers. Diving doors are provided at the aft and starboard side together with a diving ladder. The boat is extremely stable at rest with our innovative “Gull- Wing” side floatation sponson. The flat deck with large scuppers ensures that the deck is completely sealed and self-bailing in rough weather conditions. Their demo boat in excellent condition.

NEW BUILD - 11m Diving / Fast Transfer / Power Cat

ID: 1398

Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of dive and tour operators who want to offer the best to their clients. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 DC is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

NEW BUILD - Scavenger 15 Aquamaster.

ID: 2095

The sleek and upmarket design and look of the Scavenger 15 makes it an unobstrusive workboat silently working at any worldclass marina or waterside residential areas. It is in operation worldwide in canals, and upscale marinas for the easy cleaning and collection of floating rubbish, seaweeds, plastic bottles etc. Motorised Rotating Stainless Steel Bascule Filter Cage makes clearing floatsam effortless. The rotating basket can pickup 20kg per load and the boat has a total load capacity of 250kg of floatsam. The Scavenger 15 is also easy to maneuver, has low fuel consumption and the strong aluminium hull needs little maintenance. The non marking, ultra light PU foam fender also protects the craft against damages and prevents scuffings to boats at the marina.

NEW BUILD - Centurion 20 General Workboat.

ID: 2060

The Centurion 20 is a wide body workboat to provide generous working space in a small workboat. The hull is also designed for stability for crew during working. This hull is also constructed with multiple chambers underneath and foam filled to making it virtually unsinkable even when completely flooded.The Centurion 20 is a versatile hull that can be configured for tiller control, centre console control, and will carry 10 crew with ease. It can also be powered by single or twin petrol or diesel outboard motor

NEW BUILD - Centurion 40 Mooring Workboat.

ID: 2065

The centurion 40 an extremely versatile and reliable workboat. Designed and manufactured by FIVE, it can double up as a mooring boat and an oil spill response boat. This workboat has an in built chemical tank for oil spill response & a bollard pull of up till 2000kg. The boat can also be configured into a passenger boat with a spacious cabin for 12 pax & 2 crew.

NEW BUILD - Centurion 21 Mini Tug Workboat

ID: 2061

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

NEW BUILD - 12m Multirole Vessel

ID: 820375

In the aftermath of the oil spill which resulted from the grounding of the container ship Rena on the Astrolabe Reef in New Zealand’s Bay of Plenty, Auckland Council identified the need to improve Auckland’s own readiness to respond to a similar incident and set about to acquire a new vessel for this purpose. Early in the process it was identified that oil spills are (thankfully) rare events and that it made sense to build a vessel which could perform other tasks in support of operating and maintaining Auckland’s busy harbour. Auckland Council put out a request for proposal to design and build a vessel with multiple requirements: to be capable of servicing the entire Auckland Inshore Limits in a range of weather conditions; to carry and deploy specialist oil recovery and dispersal equipment; to recover debris from the water or to tow stricken vessels away from danger; to carry vehicles to Hauraki Gulf islands; to support Police dive teams; to maintain harbour and Hauraki Gulf infrastructure; to be transported by road to Manukau Harbour and other regional locations. It was to be a simple, easy maintenance vessel with minimal fit out, outboard powered with minimum on-board services, designed to be operated by a diverse mix of crew, sometimes during periods of urgency and high pressure. The result is an extremely robust, well-built vessel, purpose designed in every detail to reflect the input of the customer. With a relatively deep vee hull form and substantial overall displacement, HM5 is a very seaworthy and capable vessel in which the Harbourmaster’s team has confidence to attend any emergency. A manually operated folding bow door provides vehicle access without compromise to the reliable, easy maintenance brief. A high-capacity hydraulic crane, powered by diesel power pack, enables autonomous loading/unloading from other vessels or shore side. A comfortable, fully enclosed wheelhouse provides warmth and shelter to the crew, with a dedicated toilet compartment accessed from the aft deck.

17m General Service Workboat Available for Sale & Charter.

ID: 2196

This new, compact and powerful workboat has been designed by Macduff Ship Design Ltd (Scotland) and is outfitted for a number of harbor duties : towing, berthing, fire-fighting operations.  Classified by BV (Class Notation I, +Hull, *Mach, Launch) this workboat has a bollard pull of 10T. and 12 knots service speed. Complete e very comfortable accommodation for 4 crew members.

NEW BUILD - Combination Harvester & Pickup Vessel

ID: 1048

Material: steel, stainless steel or aluminum. Technical Description: Craft result from the combination between the vessel Harvester and the pick-up vessel , for which features of the cutting tape and collection , of a central belt which transfers the collected material came from the first tape up to the storage bin and an arm charger for the material discharge. Unlike the Pick-up, you can work with a single operator who, once filled the entire storage area, is transferred in the crane cab command to download the material. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 35-40 cm . Considering the hull distance from the edge to the collection point reached by the arm, the pick-up can also collect material on the banks. There are built in series , therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

NEW BUILD - Watercraft Draga

ID: 1047

Natanti acts to ' opening of waterways in swampy areas by means of an excavator arm .  They have a central container , which can be hinged on one side, on which is loaded the dredged material to be discharged onto the ground with operation yield security thanks to  standing places stabilizers aft .  Where required, the container can act as a compactor, or, thanks to a particular mechanism,  squeezes the wet algae for compacts and reduce clutter. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 30-35 cm. Considering the hull distance from the edge to the collection point reached by the arm, the dredger can also operate on the shores. There are built in series, therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

NEW BUILD - Amphibians

ID: 1060

Material: steel, stainless steel or aluminum. Technical Description: Any type of our production vessel for the cutting and collection of algae can be transformed into amphibian and therefore work both in water and on land , being able to climb to the shore due to the three pairs of rubber wheels twinned or tracks to be fitted. The cutting equipment solutions can be decided with the customer.

New Build - Centurion 25 Pilothouse Mini Tug.

ID: 1998

The Centurion 25 Pilot house Minitug is our latest upgraded design of the Centurion 25 Minitug incorporating a Pilothouse at the bow for working in different weather conditions. The boat is constructed tough and strong with a static bollard pull of almost 2000kg. Constructed with multiple chambers, foam filled construction with self-draining cockpit, this boat provides safety for crews working in open waters. Boat is suitable for use as a mooring boat, small tug or pusher, pulling oil booms, or even as a general-purpose workboat.

NEW BUILD - Watercraft Notching Star

ID: 1044

Small to medium workboats fitted at the stern with twin screw propellers for propulsion and two bow propellers that are star-shaped, independent and adjustable in depth, adapted to the cutting of algae.  These are particularly suitable for the opening of waterways in dense vegetation. Dimensions and working characteristics are defined in collaboration with the customer.

NEW BUILD - Watercraft Clam

ID: 1067

Designed for cleaning the bottom of the nurseries , for the collection , the storage and selection of clams. Its a hull with flat bottom having installed at the bow a belt conveyor equipped with a particular device (patented) for the removal of the bottom and on the central bridge, approximately 35 square meters, it is possible to install the equipment ( screens, pumps, selectors clams, etc ). Vessels of this type are provided in almost all the Venetian lagoon and several consortia of Chioggia Fishermen, Goro and surroundings . Thanks to sophisticated machinery installed on board, the clams are unloaded from vessels already packaged, ready for purging in the sheds. The innovation of these vessels has greatly facilitated the work of the fishermen that before the introduction of this vessel, in the 90s, everything was done by hand.

NEW BUILD - Watercraft Pickup

ID: 1059

Natanti acts to cutting, collection, grubbing and infested vegetation drain and floating solid waste or semi-submerged . The cutting system and frontal collection consists of a U-shaped cutter toolinstalled on a conveyor belt, adjustable in depth, able to charge what has been collected in the central storage container.  They can be propelled with screw propellers with antialghe system or with paddle wheels.

NEW BUILD - Milling Cutter

ID: 1042

This is watercraft equipped with rollers with knives or zappette acts grubbing of roots at the bottom of the channel, or lagoon, and all 'oxygenation of the same. They also allow pianeggiare the seabed after the grubbing operation. They are equipped with two or four rollers depending on the size of the hull. They can work at times even in the absence of water, moving on the ground thanks to the rollers.

NEW BUILD - Weeders Mono / Twin Propeller

ID: 1041

These motorboat weeders are designed with the customer to meet the specific job requirements. The T rattasi is a small motorboat designed to only cut algae, reeds and bushes on the shore, in the canals or small streams. The material cut in the middle of the cutter bar overturned T placed at bow , tilt to the right and left by 90 °, it remains to float in surface and, thanks to the current is conveyed in a single collection pointgenerally represented by small dams consist of gates ever made by us.

NEW BUILD - Mini Harvester

ID: 2172

Nettuno Motobarche is an Italian shipyard specialized in river, shore and harbour maintenance workboats.  They design and build aquatic weed harvesters in a range of sizes to meet all needs with many models in service in various parts of the world. HARVESTER MINI is the smallest in their range and it is designed for easy transportation and deployment. This workboat is especially developed for removing plant growth from embankments and waterway, and thanks to her a limited draft and compact size can operate very close to the shore and in areas where larger vessels would not be able to work. These environments are usually very hard on machinery of any kind and in order to withstand years of hard use and neglect HARVESTER MINI is entirely built in stainless steel with the added protection of an epoxy coating. The boat can be equipped with a variety of cutting devices to be able to operate even in difficult situations.  There are also additional features that can be added to the standard model, including protection for the pilot, storing tanks, etc. Engine maker and fuel tank capacity are per Owner’s requirements. 

NEW BUILD - RAscal 1600 Line Handling Launch

ID: 4153

The Robert Allan Ltd. Designed RAscal 1600 is designed to provide improved efficiency, comfort, and safety for its work role. Although having the outward appearance of a tug, the RAscal 1600 is a launch with lighter construction and slimmer, more streamlined hull. The hull and deckhouse are steel, constructed to Lloyd’s rules, and outfitted to international regulatory standards. It is powered by a single Caterpillar C18 engine rated 447 kW (600 hp) driving a one metre diameter four-bladed propeller in a steering nozzle via a Twin Disc MGX-5146SC, 2.5:1 reduction gearbox and a stainless-steel shaft. The steering nozzle provides good efficiency and manoeuvrability ahead as well as excellent stopping and reverse performance and control. Comfortable overnight accommodations for three crew are provided in the foc’sle. Fit out includes two cabins, a pantry, mess, and washroom with shower. There is also a crew rest area in the spacious wheelhouse. Visibility to the sides, forward, and overhead is also excellent. A protective pipe cage is fitted over the house to prevent the ship’s mooring lines snagging on the house.

NEW BUILD - Nettuno Motobarche HARVESTER

ID: 4150

The HARVESTER is a workboat equipped with a frontal conveyor belt , adjustable in depth and equipped with cutter bars (one horizontal and two verticals). The materials collected are then transferred to a central storage conveyor belt that moves them toward the rear or lateral discharging conveyor belt. The discharging conveyor belt, once near the shore, can discharge the weed directly on the ground, on a truck or on another boat.

9m Workboat - SWB 9200 Hazard Response Boat

ID: 4107

Main Features to address Hazmat response. Crew + 4 HNS team. Up to 22 knots with CPP (30 knots with WJ).

NEW 9.2m Oil Spill Response Workboat

ID: 4091

Designed and developed by engineering teams from Portugal, England, USA and Norway and built at Peniche Shipyard. This is the first workboat the company has produced for oil spill response. It is a special workboat, equipped with a controllable pitch propeller (CPP). This system can deliver high-speed and also to the required Bollard Pull to tow oil containment booms (up to 3 ton) The workboat was built to achieve much lower noise and vibration levels.

NEW BUILD - Centurion 30 Minitug Catamaran.

ID: 2063

This Centurion 30 Minitug is constructed with a catamaran hull design for higher stability during work. Twin Isuzu 320hp Marine diesel engine is combined with powerful Hamilton Waterjets to give it a 2000kg bollard pull. A hydraulic capstan is also installed on deck to allow oil hoses to be pulled onboard for maintenance before releasing it back to service offshore.

NEW BUILD - Scavenger HYD22 Weed Harvester.

ID: 2094

The Scavenger HYD22 Weed Harvester is the latest dual purpose river maintenance boats designed by FiveAB Group. This boat can be used for collecting floating rubbish via the conveyor belts directly into the boat. It can also be used to cut underwater weeds up to 1.2m depth and the weeds will be collected immediately via the conveyor and into the boat for disposal.  The unique twin propeller propulsion system will give you extremely good manoeuvrability in tight situation and can even rotate the vessel on the spot.

NEW BUILD - Scavenger HYD30 Weed Harvester.

ID: 2096

The Scavenger HYD30 Weed Harvester is our latest and very effective weed harvesting boat that is capable of cutting weeds up to 2 metres below water surface. The high speed cutting blades and conveyor system can easily cut and remove unwanted water weeds up to 3 tons within 30 minutes. The twin propulsion system makes the boat highly maneuverable even in extremely tight places, allowing it to even turn 360 degrees on the spot. The Scavenger HYD30 also doubles as a floating rubbish (floatsam) removal boat with the stainless steel conveyor system and large cockpit area. This is an extremely tough and reliable workboat essential in the maintenance of waterways, and reservoirs. It is suitable for use in Salt or Freshwater.

NEW BUILD - Centurion 24 General Workboat.

ID: 3021

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crew or equipment and having a top speed of 18 knots, this boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

NEW BUILD - Vigilant 18 RHFC Workboat.

ID: 3015

The new VIGILANT 18 RHFC (Rigid Hull Foam Collar) workboat is similar to the Industry Standard Rigid Hull Inflatable Boat (RHIB) except that we have substituted the inflatable collar with a puncture proof foam collar! This special foam collars are made from Closed Cell Foam and then covered with our special spray technique to encase the foam collar with our proprietary PU skin. To make it even tougher, we double reinforced the PU skin with reinforced netting to make it virtually indestructible. The Vigilant 18 RHFC is a premium quality workboat that is unsinkable even when totally flooded with water and is suitable for inshore and offshore use.

NEW BUILD - Scavenger 40 Aquatic Loadmaster.

ID: 3014

The Scavenger 40 LoadMaster is a specially designed weed pulling and floatsam collection boat with a hydraulic crane installed onboard. The boat is built as a standalone unit that can move to a selected location to pull weeds and collect it onboard for dumping at a designated collection point. The LoadMaster is designed with a long reach crane to reach for weeds up to a depth of 2 metres and has a pulling force of up to 450kg. The large open deck has a carry capacity of up to 5000kg of weeds, floatsams/rubbish per trip making it a highly efficient and economical boat for environmental cleaning.

NEW BUILD - Scavenger 30 Aquatic Master with Conveyor.

ID: 2097

The Scavenger 30 AquaticMaster is a specially designed floatsam collection boat with conveyor collection system. The boat is built as a standalone unit that can move to a selected location to collect rubbish / floatsams and collects it onboard for dumping at a designated collection point. The AquaticMaster also has a weed cutter attached to the end of the conveyor head to cut weeds up to a depth of 2 metres. The large open deck has a carry capacity of up to 4000kg of floatsams / rubbish per trip making it a highly efficient and economical boat for environmental cleaning.

NEW BUILD - Centurion 26 Dive Support Boat.

ID: 2092

The Centurion 26 is a specially designed "tri-hull" design for unsurpassed stability for working at rest, dry riding in rough weather condition. The boat is protected by its 8mm thick hull plate with fully reinforced side frames 600mm apart. Specially formulated light weight Polyurethane foam fenders are installed all-round the gunwhale for further protection. The boat can be used as a diving support vessel and has a large cockpit that can be used for installation of diving panels, compressed air tanks and also a detachable side diving ladder. The boat has a loading capacity of 2000kg which makes it suitable as a general workboat, crew transfer boat.

NEW BUILD - Centurion 30 Minitug Monohull.

ID: 2064

The Centurion 30 Minitug is a larger minitug workboat designed for hose handling with a bollard pull of approx 2000 to 3000kg depending on engine configuration. It is powered by twin ISUZU Inboard diesel engines coupled to either an inboard propulsion system or with a Hamilton Jet. Similarly, to the Centurion 30 Minitug Catamaran, a hydraulic operated Capstan with a pull capacity of 2000kg is installed onboard to pull floating hoses onboard for maintenance purpose. It can also act as a crew transfer boat, or as a general purpose workboat.

NEW BUILD - Centurion 24 Fireboat.

ID: 2062

The Centurion 24 Fireboat is a unique standalone, mini-Fireboat with a 1000 litres per minute fire fighting pump coupled with the latest computerized foam mixing system. This powerful little boat is small enough and easy to maneuver in tight locations in the marina or canal systems and will go where your normal fire engines is unable to reach. The Centurion 24 is also a small mini-tug boat with a static bollard pull of 1 ton and can also be used as a pusher tug. It can easily tow a large motor yacht that is on fire and bring it out of reach of other vessels. The Centurion 24 Fireboat will be a very useful boat when fighting fire near ports, marinas, open berths, canal homes, Oil and Gas installations where the normally big fire boats is unable to enter.

NEW BUILD - Blyth 14m Series

ID: 588088

Blyth Workcats are built entirely in the UK from one piece tooling for exceptional strength. All engineering and electronics are installed by in-house engineers and stainless steel fittings are custom made within their own fabrication workshop, offering a completely bespoke service to our clients.The company works closely with naval architects and surveyors of the highest professional standing and we take pride in our ability to construct vessels to meet or exceed the rigorous standards required for MCA Code of Practice, Seafish, Irish P5 and MCA P5&6.The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans with a wide selection of 14 Cats delievered to date.

NEW BUILD - Blyth 11m Series

ID: 588086

The Blyth 11m is available as both an asymmetric hull form and the Deep Vee planing hull form. The asymmetric has a fine forward section developing into a medium deadrise single chine form aft allowing the vessel to plane for high speed operations. Fitted with water jets it offers extremely shallow draft and excellent sea keeping characteristics. The deep Vee used commonly for our general workboat application has a very fine entry which has the design optimised for low resistance, exceptional levels of performance, economy and comfort.

NEW BUILD - 1200m3 Trailing Suction Split Hopper Dredger

ID: 493482

We are pleased to offer this High Quality Split hopper Dredger built by Nodosa Shipyard in Spain. Class: GL; Class + 100 A5, RSA (50) Split hopper dredger + Hull + MC; Group III Class T. BUILT TO ORDER. The vessel is a self-propelled split hopper dredge. It has two independent hulls that open to drop its load of spoil and deposit it at the agreed place on the sea bottom. The hopper has a capacity of 1200 m3. This ship is equipped to perform various operations of maritime works, especially designed for dredging up by suction pump, although it also can dredge with a backhoe which is located on a rolling gantry hosted on top of the hopper. Of course, it can be used simply to transport dredging products... For all these reasons its versatility is more than demonstrated.

NEW BUILD - Trailing Suction Split Hopper Dredger 1500m3

ID: 520760

BUILT TO ORDER by Nodosa Shipyard in Spain. The vessel is a self-propelled split hopper dredge. It has two independent hulls that open to drop its load of spoil and deposit it at the agreed place on the sea bottom. The hopper has a capacity of 1500 m3. This ship is equipped to perform various operations of maritime works, especially designed for dredging up by suction pump. Of course, it can be used simply to transport dredging products. For all these reasons its versatility is more than demonstrated.

NEW BUILD - 15.5m Versatile Workboat

ID: 620697

The VERSAWORKER 1606 is mainly developed for towing, pushing, anchor handling and general support. The large free deck area allows for transport of equipment and containers. The shallow draft and powerful propulsion make the VERSAWORKER 1606 a truly versatile workship. The flexibly mounted deckhouse comprises two double cabins and a sanitary space. A small pantry is incorporated in the wheelhouse. Class: Bureau Veritas I + HULL + MACH, TUG, Coastal Area,

NEW BUILD - 8.09m Road Transportable Multi-purpose Workboat

ID: 617614

The BUMPER 803 is a road transportable multi-purpose workboat for inland waters. The large deck area, the shallow draft, the telescopic topdeck and the pushbow makes the BUMPER 803 a versatile boat that can be deployed for shore works, ferry work (up to 12 passengers) as well as pushing and towing activities. Built to Order.

NEW BUILD - 14.95m Workboat

ID: 424386

This 14.95m Workboat is suitable for a range of applications. Survey: 2C. Main Engine: 2x CAT 3306 220kW each. Gearboxes: 2x twin plate gearbox and propeller shaft. Top Speed: 8.5 knots approx. Fuel: 11,600 litres. 4 Point Anchoring System. A-Fame: 10 Tonne. Deck Winch: 30 Tonne central deck winch. Deck Crane: 4.6 Tonne Palfinger PK12500C. Moon Pool: 400mm diameter